An economical low-foaming blend of phosphoric acid and sulfuric acid. For daily acid rinsing and controlling milkstone in piplelines and milking equipment.

#1201150 - 4x1 gallon case
#1201167 - 5 gallon pail
#1201174 - 15 gallon drum

CIP CLEANING OF PIPELINES, MILKING MACHINES and BULK TANKS

1. Immediately after milking, flush entire system with warm (100°F) water until the water runs clear.
2. Circulate a solution of SANITERGENT MARK X or CHLORINATED PIPELINE DETERGENT according to their label directions. Hand brush all parts not coming in contact with the solution.
3. After cleaning, rinse thoroughly with water at 120°F and allow to drain.
4. Acid rinse with a solution of POWER TEAM ACID RINSE at a rate of 1 ounce per 10 gallons of warm water to prevent milkstone buildup and water spotting. More POWER TEAM may be required in hard water and large systems. Twice each week, instead of acid rinsing, rinse with a solution of POWER TEAM ACID RINSE at a rate of 1 ounce per 2 gallons of 120°-160°F water for 10 minutes for the control of milkstone. Rinse with water and drain.
5. Before reuse, sanitize with a solution HYPO-CHLOR 6.40 at a rate of 1 ounce per 2 gallons of water (200 ppm) per label directions, or follow local health recommendations. Drain the used solution from the equipment and air dry. DO NOT RINSE.

FOR DIRECTIONS ON MANUAL CLEANING SEE CASE LABEL.