DIRECTIONS FOR USE WITH A PRESSURE WASHER

1. Use water without detergent in an initial cleaning to remove loose soil. Consult the pressure washer manufacturer's recommendations for maximum water temperature.
2. Place detergent suction tube directly into container of HEAVY-DUTY DEGREASER. Adjust metering valve (if applicable) to desired setting. Dilute 1 part HEAVY-DUTY DEGREASER to 50 parts water. Use more to remove heavy soils. Set nozzle to low pressure, hold the nozzle 12-18 inches from the surface. Spray soiled areas, working from the bottom up and allow HEAVY-DUTY DEGREASER solution to penetrate for 1-3 minutes. If needed, use a soft brush on heavily soiled areas. 
3. Rinse with high pressure water until foam is completely removed. Do not wash in direct sunlight or allow solution to dry on surface.

SUGGESTED DILUTION RATIOS FOR MANUAL AND MISCELLANEOUS APPLICATIONS:

*NOTE: Prior to use on fabrics, apply a small amount to an inconspicuous area to test for colorfastness.