DIRECTIONS FOR USE WITH A PRESSURE WASHER

1. Use water without detergent in an initial cleaning to remove loose soil. Consult the pressure washer manufacturer's recommendations for maximum water temperature.
2. Place detergent suction tube directly into container of House Wash RTU. Adjust metering valve (if applicable) to desired setting. Spray soiled areas, working from the bottom up and allow House Wash RTU solution to penetrate for 1-3 minutes. If the foam level is not acceptable, adjust metering valve and respray soiled areas. 
3. Rinse with water until foam is completely removed. Do not allow solution to dry on surface.
4. If soil remains, use a strong solution (10 fl. oz. of House Wash RTU to one gallon of water) and scrub stubborn soil with a brush. Repeat step 3.