Ready-To-Use Wash & Wax for Pressure Washers

Category: Automotive
Add to wishlist

Can be used on all vehicles, from cars to lawn mowers. Apply with pressure washer or by hand. Provides your vehicle with additional protection without the threat of build up from repeated applications.

Product Number 1001792
Old Product # ST-179
AutomotiveAutomotive Pressure Wash Solutions- Ready-to-Use

#1001792 - 4 x 1 gallon


  1. Do not apply Wash & Wax Ready-To-Use (RTU) solution in direct sunlight. Seek a shaded location.
  2. Insert the chemical injection pickup hose of the pressure washer into the container of diluted Wash & Wax RTU solution. Use the low-pressure nozzle setting.
  3. Apply the Wash & Wax RTU solution with the chemical injection applicator in horizontal passes. Work from the bottom up. Road film and heavy soil may require the use of a sponge, soft brush or soft cloth.
  4. Wash & Wax RTU solution should remain on the surface for 1 to 3 minutes. Be ready to apply a high-pressure water rinse so that the Wash & Wax RTU solution does not dry on the surface.
  5. Rinse thoroughly with high-pressure water. Maintain sufficient distance from the surface to avoid damage. Dry with a chamois or microfiber towel.
  6. Consult the pressure washer manual for directions and precautions.


  1. Add 5 ounces of full-strength Wash & Wax RTU to a bucket of water and mix thoroughly.
  2. Do not apply Wash & Wax RTU solution in direct sunlight. Seek a shaded location.
  3. Apply Wash & Wax RTU solution to pre-cleaned surfaces with a sponge, soft brush or soft cloth.
  4. Rinse thoroughly with water and dry with a chamois or microfiber towel.

Wash & Wax RTU can be removed from glass surfaces by using a vinegar and water solution. Contains a mineral oil and cationic surfactant emulsion.